Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Mission Hills, CA
Chimney repair in Mission Hills usually comes down to one thing: the house was built between 1940 and 1965, and the clay tile flue liner has been quietly failing for decades. We’re Chimney Sweep Northridge, and we’ve served Mission Hills since 2012. When you call (833) 589-9223, you’ll get a straight answer about what’s actually happening inside your chimney, backed by camera inspection and repair work done with professional-grade materials. Mission Hills homes sit in the hot, dry San Fernando Valley, where fireplaces go unused for months at a time. That idleness doesn’t protect a chimney. It lets problems hide until the first cool night.
Why Mission Hills Homes Are Different
Mission Hills is squarely in the San Fernando Valley, where summers run long and dry and the heating season is short. Most of the housing stock across ZIP codes 91345, 91346, and 91395 is mid-century: ranch-style homes and Spanish-revival builds from the 1940s through the 1960s, most with their original masonry fireplaces and clay tile liners. Those liners were never designed to last seventy years. Clay tile expands and contracts with heat, and over decades the mortar joints between sections crack wide open. Once that happens, heat and combustion gases can reach the brickwork directly. That’s a repair issue, not a cleaning issue, and it’s the single most common finding when we camera-inspect a first-time Mission Hills chimney.
The local climate adds another layer. Santa Ana wind events drive grit, palm frond fragments, and tumbleweed pieces into chimney caps up and down Sepulveda Boulevard and around the older tracts off Haskell and Woodman. After a good Santa Ana night, we routinely pull soot-caked leaves and wind-blown debris out of caps on the ranch homes. During the long warm months, birds and squirrels move into uncapped or damaged flues and build nests. Then the first fire of October sends smoke backing into the living room because the flue is blocked. By the time a homeowner notices, the problem has been building for months. Mission Hills chimneys don’t fail from overuse. They fail from long idle stretches and accumulated damage nobody sees until it’s tested.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Mission Hills Services
Most Mission Hills homeowners call us first about one of two things: the chimney they haven’t used in years and suddenly want to light, or the dryer vent behind the wall that hasn’t been cleaned since the house was purchased. Both are fire-safety systems. Both get ignored in the off-season. And both are jobs we handle directly, without handing you off to anyone else.
Chimney Sweep in Mission Hills
A chimney sweep in Mission Hills means more than running a brush through the flue. On the older homes here, we’re checking what the long idle season left behind: creosote built up from last winter’s fires, animal nests, and debris that Santa Ana winds pushed past a failed cap. Because many of these fireplaces are used only a handful of times each year, homeowners tend to skip routine sweeping. That’s exactly why the first-fire check matters. We clean the flue, confirm the liner is intact, and tell you plainly whether it’s safe to light. Get the full scope on our Chimney Sweep in Mission Hills page.

Dryer Vent Cleaning in Mission Hills
Your dryer vent is a separate fire hazard from your chimney, and in Mission Hills it’s one that gets overlooked because the duct runs through the wall or under the house and nobody ever sees it. Lint accumulates, airflow drops, and the dryer runs hotter and longer. Our dryer vent cleaning service clears the full duct run, checks the exterior termination point, and improves dryer performance on the spot. For homeowners in the older ranch homes here, it’s not uncommon to find a vent that hasn’t been touched in twenty years. Details are on our Dryer Vent Cleaning in Mission Hills page.

Chimney Repair in Mission Hills
Chimney repair in Mission Hills is different from repair work in newer parts of the Valley because the homes themselves are older and the original chimney components are reaching the end of their service life at the same time. Clay tile liners crack at the mortar joints. Chimney crowns built in the 1950s were made from a standard concrete mix that spalls and crumbles after decades of sun exposure. Flashing that was nailed and caulked has long since separated from the roofline, and when a Santa Ana rain finally comes through, the water shows up as a ceiling stain around the fireplace wall. Every repair recommendation we make is backed by camera video you can watch yourself. If the liner is compromised, we explain whether HeatShield resurfacing can restore it or whether a full liner installation is the honest call. If the crown is cracked but the flue is sound, we tell you that too. Nothing gets recommended without visual evidence. Our full Chimney Repair scope walks through each repair category in detail.
Chimney Cap Installation
Signs you need it
Rainwater is pooling in the firebox, you hear birds or scratching sounds from inside the flue, or you can clearly see that the existing cap is missing, rusted through, or no longer seated on the crown.
What it costs in Mission Hills
Chimney cap installation in Mission Hills typically runs $225 to $550 depending on the flue size and the cap material, with professional-grade options from Copperfield and Olympia Chimney in that range.
How we do it
We measure the flue opening, select a cap rated for the fireplace type, seat it onto the crown, and mechanically fasten it so Santa Ana wind gusts can’t lift it.
Chimney Crown Repair
Signs you need it
The concrete surface at the top of the chimney has visible cracks, pieces are missing from the edges, or water is staining the ceiling near the fireplace after rain.
What it costs in Mission Hills
Crown repair here runs $300 to $550 when the crown surface can be resurfaced, while a full crown rebuild on a Mission Hills ranch home ranges from $900 to $1,700.
How we do it
We remove the failing concrete, build or resurface the crown with a proper slope and drip edge, and apply a weather-resistant finish that stands up to valley sun and winter rain.
Chimney Flashing Repair
Signs you need it
Water is entering around the roofline where the chimney penetrates, drywall is stained nearby, or the existing flashing has pulled away and exposed gaps at the corners.
What it costs in Mission Hills
Flashing repair on the Mission Hills chimneys we see typically ranges from $300 to $700, depending on how much of the existing metal can be reused and how difficult the roofline access is.
How we do it
We remove the failed flashing, install new step and counter flashing, and seal the corners with a high-temperature sealant that won’t crack the first time the chimney heats up.
Chimney Liner Installation
Signs you need it
Camera inspection shows cracked tile joints, missing sections of clay liner, or flue gases visible behind the existing liner structure.
What it costs in Mission Hills
Chimney liner installation in Mission Hills typically starts around $2,600 and can run to $8,500, with stainless steel liners from DuraFlex representing the professional-grade standard we install.
How we do it
We camera-document the existing condition, measure the flue precisely, install a correctly sized stainless liner, and verify the full run before sealing and testing the system.
What Chimney Repair Costs in Mission Hills
| Item | Typical range in Mission Hills |
|---|---|
| Chimney cap installation | $225 – $550 |
| Chimney crown repair (resurfacing) | $300 – $550 |
| Chimney liner installation | $2,600 – $8,500 |
These are the ranges we most commonly quote on Mission Hills homes. Before any work is approved, you get a fixed written estimate. No surprise charges after the fact.
Can you repair a clay tile chimney liner, or do I have to replace it?
You don’t always have to replace it. When the tile structure is still intact but the surface is eroded or the joints are cracked, HeatShield resurfacing can restore a smooth, continuous liner surface without a full reline. If the tiles are collapsed or the structure has shifted, replacement is the only safe route. We show you the camera footage before recommending either one. Call (833) 589-9223 to schedule an inspection.
How do I know if my Mission Hills chimney actually needs repair?
A camera inspection is the only way to know for certain. Visible signs include water stains near the fireplace wall, pieces of tile in the firebox, or smoke that backs into the room. In Mission Hills, age is the biggest clue: most original clay liners in the 1940s to 1960s homes here are past their design life. Call (833) 589-9223 for a camera-based inspection with a straight answer.
Brands We Service in Mission Hills
We work with a vetted lineup of professional-grade brands, and we stock the parts Mission Hills jobs actually need: DuraFlex stainless liners, HeatShield repair materials, and caps and covers from Copperfield and Olympia Chimney. These are the same supplies professional contractors specify, not big-box substitutes. Most common parts are on the truck, which means less waiting between inspection and finished repair. See the full our brands lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Mission Hills, CA
| Service | Typical range in Mission Hills |
|---|---|
| Chimney sweep | $169 – $229 |
| Dryer vent cleaning | $89 – $179 |
| Chimney cap installation | $225 – $550 |
| Chimney crown repair (resurfacing) | $300 – $550 |
| Chimney crown rebuild | $900 – $1,700 |
| Chimney flashing repair | $300 – $700 |
| Chimney liner installation | $2,600 – $8,500 |
Prices in Mission Hills run slightly higher on repair work because of the age of the housing stock. Cracks in 60-year-old clay liners and crowns take more prep work than a newer chimney would. You’ll always get a fixed price before we start, and a camera report after so you can see exactly what was done.
Neighborhoods We Serve in Mission Hills
We work throughout Mission Hills, from the older ranch tracts west of Sepulveda Boulevard to the Spanish-revival streets north of Devonshire and the homes along Haskell Avenue and Woodman Avenue. Response time across the entire area is typically a few days for standard inspections, with October and November filling fastest as first-fire calls come in.
- Sepulveda Corridor
- North Mission Hills
- Devonshire Downs area
- Haskell Avenue tract
- Woodman Avenue neighborhoods
Service Area – Cities Near Mission Hills
Chimney Sweep Northridge works across the central and northern San Fernando Valley. Beyond Mission Hills, we serve North Hills East, CA, North Hills West, CA, Pacoima, CA, and Granada Hills North, CA. If you’re in one of these areas and need a camera inspection or repair quote, the same team that works in Mission Hills will handle it.
Serving Mission Hills, CA – Our Local Coverage Area
We’re based in the Mission Hills area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Mission Hills
Minor repairs like cap installation, crown resurfacing, and flashing work typically don’t trigger a permit. A full liner replacement or structural rebuild may, depending on the scope. We’ll tell you clearly if your repair crosses that line, and we handle the paperwork when it does. Call (833) 589-9223 with your address and we’ll give you a direct answer.
During most of the year, we can usually schedule a Mission Hills inspection within a few business days. October and November are our busiest months, so it’s worth calling a few weeks before you want to light the first fire. Call (833) 589-9223 and we’ll find a time that works.
Cracked clay tile liners in 1940s and 1950s homes, usually discovered after years of the fireplace being used only occasionally. The homeowner doesn’t notice anything wrong until water appears around the fireplace or smoke backs into the room. We find it with a camera before it becomes a wall repair. Call (833) 589-9223 to schedule yours.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mission Hills Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Yolanda Delgado"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Marcus Boyd"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Nathan Whitaker